Why Auto-Rotate Screen Doesn’t Work

Android. Auto-rotate screen stopped working

GeekElectronics »Android» Android. auto-rotate screen stopped working

auto-rotate, screen, doesn, work

The other day, my smartphone started to glitch. Auto-rotate of the screen stopped working in standard applications. In some, it worked fine, but in most. did not react in any way to changing the position of the phone.

I can assume that some application caused this glitch in the system, although the Auto-rotate screen checkbox was checked in the settings.

Basically, it was proposed to install various utilities to change system settings, after which the auto-rotate screen started working.

Unfortunately, these options did not work for me. The phone still refused to flip the screen when changing position.

On a bourgeois forum, I found a SIMple recommendation. It was suggested to just turn off the phone, remove the battery and wait 2-3 minutes.

Well, since the other options did not help, I will try this.

I did everything as written. I waited 5 minutes just in case. I turn on my smartphone Everything worked!

At the moment, auto-rotate of the screen has been working as it should for several hours.

If you have a non-removable battery, just turn off your phone for 10-15 minutes.

Why screen rotation stopped working on Android

If you cannot rotate the screen automatically, then first you need to check if the corresponding function is enabled.

This can be done by selecting the appropriate option in the top panel in the quick setting.

You can also do this by going to the display of the settings in the phone.

After you are sure that this feature is enabled but not working as expected, you can proceed to the next step.

Do you know, but you can customize the screen for each game or application so that you want it to be shown constantly, and not just when you rotate the phone. here is the description.

How to enable auto-rotate on Android

If the screen rotation is gone, let’s try to turn it on first. In Android 6.0.1 this can be done very quickly.

Just pull down the top settings control panel and if you see the “Portrait” icon, then click on it to make it appear as “Auto-rotate”

How to set up auto-rotate screen on Android if it stops working

Probably many are annoyed by the automatic screen rotation in Android 7, Android 6.0 1 and so on, but you can tame it if you want.

Although even the advanced technologies offered by smartphones samsung tablets, lenovo and so on may fail at some point or work poorly (buggy).

One of the relatively common problems is that the auto-rotate screen does not work. How to fix it yourself?

If the screen rotation stops working. this is certainly bad. the function is quite convenient. It allows you to adjust the position of the screen for comfortable work.

To use this function, the smartphone has a built-in motion sensor. an accelerometer. If this element fails, the screen becomes constantly in one position.

Also, the screen will not rotate if the software is buggy. Let’s look at the situation in order.

What to do if auto-rotate is enabled on Android and does not work

If it is running and does not work, then most often the problem is solved by a complete shutdown, removing the battery for 10 minutes, and then turning it on normally.

The second method is more difficult (if the first did not help). it is to reset the smartphone or tablet to factory settings.

It will return them to their factory settings. This will help the truth only if you yourself, out of inexperience, pushed or re-installed something that is not needed.

If neither the first nor three times helped, then the matter may be in the sensor. Then you cannot do without a specialist, since the sensor needs to be replaced.

How to fix screen rotation on Android

A pretty good program “Rotation control” can help you to make settings for auto-rotate the screen.

After installation, all options will be visible. you can apply any option, including auto, with just one click on the icon.

Errors related to the system settings of individual components can also be resolved using the service menu, which is hidden from device owners.

They can be caused by a special hidden code depending on the manufacturer of the tablet or smartphone.

Unfortunately, using. this menu is risky. Therefore, without the appropriate knowledge, it is better not to enter there.

Without knowledge, you can create even more problems. All at your own risk. Success.

We are looking for a button on the tablet itself

It is possible that there is a button hidden somewhere on your tablet that is specifically designed to block automatic display rotation.

Faced a problem: auto-rotate the screen shifts unadapted applications, after which everything freezes, and you have to go into the settings, dodge, it’s inconvenient in general. I quickly did not find ways of an adequate and understandable solution in the windows interface. Unfortunately, there is no physical button either, so I decided to study the problem and here are several ways:

How to enable auto-rotate on a tablet?

Auto-rotate the screen is one of those features that someone really likes, and someone is insanely annoying. Fortunately, the functionality of the tablet allows you to customize it so that the operation of the device is as convenient as possible.

Why sometimes you need to disable auto-rotate screen

Perhaps the main and only reason is a matter of personal convenience. With active Internet surfing, this function makes it easier to view pages, since their format can be sharpened both for vertical and horizontal screens. Automatic rotation will allow you to quickly switch between pages, comfortably studying the information.

But while reading, playing games, watching videos, auto-rotation can only interfere, especially if you are using the tablet lying down. Not understanding what position is required of him, the gyroscope changes the position of the screen, causing annoyance and disrupting the rhythm of work or rest. In this case, it will be appropriate to use the shutdown function.

How to enable and disable auto-rotate on the screen

By default, the auto-rotate screen feature is enabled on all tablets, and if everything suits you, just don’t change anything. Otherwise, follow the instructions by selecting the desired device.

READ  Blue screen when loading windows what to do

Auto-rotate on iPad. To understand whether this feature is enabled or disabled, just look at the panel on which the battery level is located. If auto-rotate is enabled, the lock icon will be open, if disabled, it will be closed.

To change the state, double-click the “Home” button, bring up the multitasking menu, and select the “Lock auto-rotate” icon. It is located at the bottom left. Rotate the tablet to the position you want and press the button. Everything, after that the screen will freeze until the next reconfiguration.

Auto-rotate on Android. There are several ways here. The easiest and fastest is to call the menu located in the upper right corner of the screen. To do this, just swipe down with your finger. Find “Auto-rotate” among the icons and press, having achieved the desired state.

The second method requires entering the “Settings” menu. There open the “Accessibility” panel, find “Auto-rotate screen” and uncheck (or put) a checkmark next to it.

You can also select the “Energy Saving” widget and disable rotation through it.

Auto-rotate on Windows 8. Working with this OS is somewhat more complicated than with the previous ones. Tablets with Windows 8 periodically cause inconvenience to their owners, either by sending upside-down photos, or by unfolding the screen at the wrong moment. If you want to disable this feature, you can use several methods.

  • Charms Bar. The main function of this application is to adjust the sound, but in most Windows firmware there is also an auto-rotate control button. To quickly open the Charms Bar, press Win-I.
  • Personalization. Having entered this section, you need to select “Settings”, find the “Auto-rotate” option and uncheck or check the box in the required line. Unfortunately this feature only works on some models.
  • Keyboard. The method is SIMple, but it doesn‘t work everywhere. If a keyboard is connected to the tablet, just press the Win-O combination.
  • System registry. One hundred percent way to disable automatic rotation, but the most painstaking one. Follow this path: Run application. regedit command. path HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionAutoR. Next, the editor will open, in the right sector of which select the “Enable” parameter, open its context menu, select the “Modify” option. In the appeared field “Valure Data” set the parameter to “0”. This will block auto rotate.

Why auto-rotate screen doesn’t work on tablet

As a rule, failures in settings lead to problems with auto-rotation, sometimes. new applications or viruses. First, check the settings and run the tablet through the antivirus program. If auto-rotate is not enabled manually in the settings and viruses are not detected, you can SIMply restart the tablet.

But if the problem persists or reappears periodically, it is better to reflash the device to fix the problem at the root.

Please rate the article Loading.

Screen setting

Also, auto-rotate display can be disabled in the screen settings.

Using the keyboard

If you connect a keyboard to the tablet, then turning off auto-rotate is even easier: press Win O on the keyboard and that’s it. Unfortunately, this method is also not universal, since it does not work on all tablets.

Charms bar

When you open the Charms Bar (Win I), you will see the screen brightness control, which also has an auto-rotate lock button.

The problem is that in some cases this button is missing from the regulator. If you have just such a case, then go ahead.

Windows 10 auto-rotate screen does not work

Five ways to disable auto-rotate screen:

① When you open the Charms Bar (Win I), you will see a screen brightness control, which also has an auto-rotate lock button. The problem is that not all devices support the function, if it does not, go ahead.

charms bar

② screen settings, right-click on the screen, uncheck or put.

screen settings

③ Using the keyboard. If you connect a keyboard to the tablet, then turning off auto-rotate is even easier: click on the WinO keyboard in the English layout and that’s it. Unfortunately, this method is also not universal, since it does not work on all tablets.

④ We are looking for a physical button on the tablet, it is quite possible that it was hidden.

⑤ The most versatile and will definitely suit everyone, albeit a little complicated. Disable auto-rotate through the registry. Launch the “Run” application (Win R) and enter the familiar and beloved regedit there

execute (WinR)

registry editor

On the right side, the Enable parameter, right-click the context menu and select Modify.

We are looking for the Value field, replace it with the value 0 and now the screen does not spin and does not pose any difficulty at the most inopportune moment. In Windows 10, this issue is even easier by displaying a separate button in the notification center, activate it on click and turn it off the same way.

comments powered by HyperComments

Universal way

This method will work on any tablet. Disable auto-rotate through the Windows registry. Launch the “Run” application (Win R) and enter the familiar and beloved regedit there.

We follow this path:

On the right side, you will see a parameter named Enable. We call the context menu on this parameter and select Modify.

We are looking for the Value data field and change its value to “0”. Click OK and rejoice.

Auto-rotate screen does not work on Android: on phone and tablet

Auto rotation is a feature that changes the orientation of the screen depending on the position of the device. Unfortunately, sometimes the auto-rotate of the screen on androids does not work, despite the change in the position of the smartphone or tablet in space, the orientation does not change from portrait to landscape (landscape), but remains the same, or vice versa. Why does this breakdown occur? On the hardware side, the orientation sensor inside the device is responsible for auto-rotation. an accelerometer, aka G-sensor. This component, like other parts, can be damaged by physical impact, such as dropping, pressure by weight, impact, moisture or sand getting under the case, exposure to direct sunlight or extreme temperatures (approximately 30 ° C or less 20 ° C). When it’s really broken, only the service center will help. If auto-rotate doesn‘t work, it doesn‘t necessarily mean that you need to carry your phone or tablet to the workshop. often than not, the problem is in software settings, especially if they were inadvertently changed by a user or malware. This article has options for correcting this situation, as well as solving problems in operation due to the Smart Rotate feature of Lenovo products. It is advisable to read the instructions a few points ahead before applying them on your device.

What to do first?

On a smartphone. First make sure it is enabled in the system settings as follows:

  • Open the quick access panel (pull up the top curtain). If there is an auto-rotate icon, check it. Otherwise, let’s move on.
  • Settings
  • Section “Screen” or “Accessibility”.
  • Activate “Auto-rotate screen” by clicking on the slider or ticking.
READ  Monitor Does Not Work Light Blinks

In Android 7 Lollipop, there may be notifications in the curtain. Drag again to display more items. If there is “Vertical orientation” with a phone icon, click on it. the rotation will start when you rotate the device.

On a tablet. There is a specially designed version of Android “Honeycomb” for these devices. It is easy to recognize by its adapted design. If the interface is far from the screenshot, use the instructions in the previous paragraph.
To check if the Android auto-rotate screen is actually enabled on your tablet, click on the icon in the lower right corner. Then select the settings icon. Sequentially go through the following items: “Device”. “Display”. “Auto-rotate screen” (put a tick in front of it).

How to fix the problem

If auto-rotate is enabled but stops working, try the following in sequence:

  • Reboot your device.
  • Turn off your device. Pull out the battery. Wait 10-15 minutes. Insert the battery back and turn on the device. A tablet with a built-in battery needs to be completely discharged and wait. Connect the charger and turn it on again.
  • Change the calibration of the accelerometer. This will also help in case of poor and incorrect function performance. After selecting the last item in the path indicated further, place the device on a flat surface. Calibration will occur automatically. An example way: “Settings”. “Accessibility”. “Acceleration sensor and gyroscope”. “Calibrating the accelerometer”. You can use third-party applications (Accelerometr Calibration, GPS Status Toolbox, “Accelerometer”).
  • Reset your gadget to factory settings. If you want to keep the data, you can transfer it to a computer or memory card.
    The names of the buttons differ slightly depending on the OS version, but the path will be something like this: “Settings”. “Backup and reset”. “Factory data reset”. “Reset device” or “Settings”. “Backup and reset”. “Reset settings” ”. Confirm your choice until the procedure is complete.
  • With a small degree of probability, the function may work after a firmware update. To do this, fully charge the device. Click on the following items: “Settings”. “System”. “About phone” (or “About device”). “System update” (“Software update”). You may need to click “Check Now”. Confirm the decision. If the update is successful, a message appears that the system is the latest version. If not, you can manually update it, but this should only be done by experienced users. Let me remind you that this is unlikely to solve the problem if the Android auto-rotate screen does not work.
  • Take the device to the workshop.

Smart screen rotation is buggy

If android on the device lags in general, and you are sure that this function is absent in the gadget, do not assume that the reason is the screen rotation. You need to try to speed up the device in other ways. Some devices support Smart Turn and Smart Standby. This applies to Lenovo products after upgrading to version 4.4. Smart functions use the front-facing camera to determine from the user’s eye movements whether it is necessary to switch the orientation between portrait and landscape and whether the screen can be turned off altogether. Smart Rotation and Smart Standby can overload the device. Therefore, screen rotation works slowly or does it not at all correctly, and applications start slowly. Don’t worry, these functions can be replaced with more familiar ones. What to press:

  • Settings
  • Section “Special”
  • Scroll down to Smart Standby and disable by clicking on the slider
  • In the same section there will be “Screen Rotation”. Click on this button and instead of “Smart Rotate” set “Auto Rotate”. Optionally, you can disable rotation with the value “Disabled”.

If you have any questions. let us know Ask a question

Autorotation and the device itself will become faster. When the auto-rotate screen does not work on Android, you now know what to do. Another nice plus is the significantly slower battery drain. Attention: If, after applying all the tips from the article, the problem is not solved, and for some reason it is not yet possible to contact the wizard, but you are not satisfied with the fact that there is no auto-rotation, install the Rotation Control application from the Play Market. It allows you to manually switch the screen orientation from the quick access panel, regardless of the health of the hardware. If you want to immediately mark all applications in which you need to change the orientation automatically, we recommend “Rotation Control”, and if a low consumption of system resources is more priority, “Orientation Manager”. Just remember that running programs create an additional load on the battery and, like the standard implementation of auto-rotation, makes it so that it discharges faster.

Auto-rotate screen does not work on tablet

Today, many modern gadgets have the “Auto-rotate” function, which allows you to change the screen orientation from landscape to portrait and vice versa in a matter of seconds. This option is very convenient when reading books or watching videos on the tablet. Sometimes, during the operation of the gadget, various problems may arise, leading to the failure of the auto-rotate function. What are they and in what ways you can fix them yourself, we will understand further.

Why auto-rotate screen doesn‘t work on tablet

If there are problems with the automatic transition of the screen orientation from portrait to landscape and vice versa, it is quite difficult to immediately understand what is the reason, and instantly eliminate the malfunction.

The following factors can lead to the failure of automatic screen rotation:

  • Software malfunction;
  • An error in the operation of the set settings;
  • Malfunction of the G. sensor caused by its physical damage;
  • Infection of the operating system of the gadget with a virus.

Each of the above factors can be easily eliminated on your own, without contacting a specialist.

What to do if auto-rotate screen stops working

If the automatic screen rotation function has stopped working on the tablet, the first step is to look into the settings and check if it is active. If the function is disabled, then all you need to do is turn it on. If everything is turned on, but auto-rotate refuses to work, run a check of the gadget software for viruses, and then reboot it.

If the above steps do not work, try performing a hard reboot. To do this, turn off the device completely and remove the battery from it for at least a quarter of an hour. After waiting the necessary time, return everything to its original state and check if the function works.

Failure of auto-rotation may be the result of malfunctions in the functioning of the G-sensor, which determines the angle and speed of rotation of the gadget relative to space. To troubleshoot the problem, go to the engineering menu and adjust the gyro sensor. To do this, open the settings menu, find the “Accessibility” item in them, and select the “Acceleration sensor” section in it. In this section, you need to activate the “Calibrate the accelerometer” parameter. All questions asked to you during the calibration should be answered “yes” or “agree”, and the device itself should be placed on a flat surface for this time. Be careful when calibrating the gadget, as your erroneous actions may negatively affect its operation in the future.

READ  How to Record Screen on Samsung A50

Additionally, in some devices, you can make special applications designed for testing and calibrating it.

If, if the tablet’s auto-rotate function is broken, there is a possibility that its software is out of order, you can try to reflash the device. To do this, go to “Settings” and find the “About tablet” section there. Select “Update system” in it. The gadget system will search for an updated version of its software and will automatically install it.

If after all these actions the auto-rotate of the tablet screen does not work, try resetting its settings to factory settings by selecting the “Settings” section in the main menu, and in it. “Restore and reset”. In this subsection, press “Reset settings”. At the same time, it is important to remember that performing this action will entail the deletion of all information on it, therefore, those data that are especially important to you should first be saved on a USB flash drive or other device. After completing the reset, you need to check if the function you need works.

If the function does not work even after resetting the settings, only a specialist can help you, who will make a complete diagnosis of the device and identify the true cause of the problem.

How to enable and disable auto-rotate

On many tablet models, this feature is enabled by default. If you need to disable it, you can always do this by accessing the gadget’s settings. Go to the “Settings” menu, from there. to the “Screen” subsection and disable the “Auto-rotate screen” function in it. SIMilar actions should be performed if you need to enable this function.

If a keyboard is connected to your tablet, you can start changing the screen orientation or turn it off using the Win. O button combination.

Enabling automatic screen rotation

At times, the auto rotate feature could be accidentally disabled or not enabled by default after installing the operating system. If the screen on Android does not rotate for this reason, then you must enable the option in the settings. This is done according to the following aLGorithm:

  • Open smartphone settings.
  • Go to the “Screen” section.

Find the line “Auto-rotate screen”.

  • Activate the function by moving the slider to the right.
  • In newer Android versions, this option can be brought to the quick access screen. To do this, lower the shutter from the top of the display, go to the “Sort” menu and move the corresponding button to the visibility zone. After completing these steps, the function will be turned on and off with one click.

    What to do if screen rotation does not work on an Android smartphone?

    The function of automatic screen rotation allows you to improve the display of information on the smartphone display in certain conditions. So, for example, it is more convenient to read an article in a vertical orientation of the device, and watch a movie in a horizontal orientation. Switching between modes is done by SIMply turning the phone over to the desired plane, a gyroscopic sensor is responsible for this, which tracks the position of the device in space. In this article, we will figure out why the screen does not rotate on Android and how to solve this problem.

    Reasons for inoperability of auto-rotate

    Automatic screen rotation may lose its functionality due to software or hardware reasons. These include:

      accidental disabling of the function in the settings or the lack of its activation on a new smartphone;

  • failure of the operating system;
  • influence of third-party applications;
  • breakdown of the gyroscope;
  • disconnecting the contacts responsible for transmitting information from the gyroscope.
  • Let’s consider each problem in more detail and highlight ways to solve it.

    Locking auto-rotate in one position

    Disabling automatic rotation is performed in the same sequence as enabling. To do this, you need to enter the appropriate section of the settings or use the quick access shutter. When the function is disabled, the smartphone will always be in portrait orientation of the display, with the exception of videos that have been deployed to full screen.

    Gyroscope breakage

    Failure of the gyroscopic sensor has characteristic features:

    • lack of system response to a change in the position of the mobile device;
    • the screen rotation on the smartphone occurs spontaneously;
    • irregular occurrence of the problem.

    In addition to the breakdown of the gyroscope itself, a partial disconnection of the contacts transmitting information could occur due to the fall of the device. In any case, this nuisance cannot be resolved on its own. You will have to contact a service center or a specialist.

    Troubleshoot software problems

    Often, the appearance of problems with display rotation is related to a failure in the smartphone software. However, it should be understood that the screen does not flip on the desktop and in some applications.

    The first step is to restart your smartphone, the problem may disappear. If this does not happen, a deeper reboot is carried out with the battery disconnected (in devices where the design allows).

    Also, in some cases, auto-rotate the screen does not work after installing third-party applications on the smartphone. You should view the list of recently installed programs and disable or remove them, then restart the device and check the functionality of the desired function.

    The next step in fixing the problem is checking for OS updates. Perhaps the recently received update has a bug that was fixed with the release of a new version of Android. The check is performed in the settings menu, section “About phone”. There you need to click on the item “System update” and start searching for a new version. If there is one, you must allow its download and installation on a smartphone.

    In cases of a long absence of updates and the presence of a firm belief that the error appeared after switching to a new version of the OS, you can rollback. This is done using a special program and the corresponding installation files.

    Another extreme option is to factory reset your device. The procedure will entail the deletion of user data and all changes made in the system.

    Rotation Control

    If the screen rotation on the smartphone does not work due to a broken gyroscope, and spontaneous orientation switches are observed, then you can use the Rotation Control application. It will completely disable the function and prevent other applications from changing the position of the picture. In this case, the image can be fixed not only in the vertical, but also in the horizontal plane.

    The program will also be useful for those who have a part of the touch panel failed, since it allows you to reverse the display, thereby moving important smartphone controls to the other end of the screen.

    | Contacts | Content | RSS